MEMORIA RAM KINGSTON DDR4 8GB ECC 2133 MHZ (KVR21R15D8/8)
$11.643,43
Modelo: KVR21R15D8/8
8GB 2Rx8 1G x 72-Bit PC4-2133
CL15 Registered w/Parity 288-Pin DIMM
ValueRAM's KVR21R15D8/8 is a 1G x 72-bit (8GB) DDR4-2133
CL15 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx8,
ECC, memory module, based on eighteen 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time 1x mode (tRFCmin)
Row Active Time (tRASmin)
Maximum Operating Power
UL Rating
Operating Temperature
Storage Temperature
15 cycles
47.05ns(min.)
260ns(min.)
33.00ns(min.)
Memory Module Specifi cations
Power Supply: VDD=1.2V (1.14V to 1.26V)
VDDQ = 1.2V (1.14V to 1.26V)
VPP - 2.5V (2.375V to 2.75V)
VDDSPD=2.25V to 2.75V
Functionality and operations comply with the DDR4 SDRAM datasheet
16 internal banks Exxa
Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
Data transfer rates: PC4-2133, PC4-1866, PC4-1600
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Supports ECC error correction and detection
On-Die Termination (ODT)
Temperature sensor with integrated SPD
This product is in compliance with the RoHS directive.
Per DRAM Addressability is supported
Internal Vref DQ level generation is available
Write CRC is supported at all speed grades
CA parity (Command/Address Parity) mode is supported - Garantía por escrito de 36 meses - (5240)0(NB) - KVR21R15D8/8
8GB 2Rx8 1G x 72-Bit PC4-2133
CL15 Registered w/Parity 288-Pin DIMM
ValueRAM's KVR21R15D8/8 is a 1G x 72-bit (8GB) DDR4-2133
CL15 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx8,
ECC, memory module, based on eighteen 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time 1x mode (tRFCmin)
Row Active Time (tRASmin)
Maximum Operating Power
UL Rating
Operating Temperature
Storage Temperature
15 cycles
47.05ns(min.)
260ns(min.)
33.00ns(min.)
Memory Module Specifi cations
Power Supply: VDD=1.2V (1.14V to 1.26V)
VDDQ = 1.2V (1.14V to 1.26V)
VPP - 2.5V (2.375V to 2.75V)
VDDSPD=2.25V to 2.75V
Functionality and operations comply with the DDR4 SDRAM datasheet
16 internal banks Exxa
Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
Data transfer rates: PC4-2133, PC4-1866, PC4-1600
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Supports ECC error correction and detection
On-Die Termination (ODT)
Temperature sensor with integrated SPD
This product is in compliance with the RoHS directive.
Per DRAM Addressability is supported
Internal Vref DQ level generation is available
Write CRC is supported at all speed grades
CA parity (Command/Address Parity) mode is supported - Garantía por escrito de 36 meses - (5240)0(NB) - KVR21R15D8/8

Copyright Exxa Store - 2021. Todos los derechos reservados. - HECHO POR GUANACO STUDIO EN TIENDANUBE