SPECIFICATIONS
KVR26N19S6/8
8GB 1Rx16 1G x 64-Bit PC4-2666
CL19 288-Pin DIMM
SPECIFICATIONS:
CL(IDD): 19 cycles
ROW CYCLE TIME (TRCMIN): 45.75ns(min.)
REFRESH TO ACTIVE/REFRESH: 350ns(min.)
COMMAND TIME (TRFCMIN)
ROW ACTIVE TIME (TRASMIN): 32ns(min.)
UL RATING: 94 V – 0
OPERATING TEMPERATURE: 0oC to +85o C
STORAGE TEMPERATURE: 55o C to +100o C

DESCRIPTION:
This document describes ValueRAM's KVR26N19S6/8 is a 1G x
64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM),
1Rx16, memory module, based on four 1G x 16-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:

FEATURES:
Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self-refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
- Garantía por escrito de 12 meses - (14969)0(IN) - HX430C15FB3A/8-IN